Epomaker Alice QMK/VIA DIY Kit

$94.99

Alice QMK/VIA Dichtung mountier Hot Swappable Acryl kabelgebundene DIY Kit

  • Ergonomisches Alice-Split-Design
  • VIA/QMK Programmierbar
  • Mit Dichtung montiert
  • Gestapeltes, klares Acrylgehäuse mit beeindruckender RGB-Hintergrundbeleuchtung
  • Typ-C-Anschluss und Kompatibilität mit Windows/Mac
  • Nach Süden ausgerichtete LEDs und Unterlichter

Hinweis: Die auf den Fotos abgebildeten Tastenkappen sind Muster. Sie sind nicht im Verkauf.

Vorbestellungen werden in zwei Wochen verschickt.

Gehäusefarbe :
Terms of Service

Free standard shipping to most countries

Enjoy free shipping to most countries*. Please refer to our shipping FAQ to see if you apply.

Covid-19 Shipping Delay Notice

Shipping may be delayed due to covid-19 depending on your country regulations.

Mechanisches DIY-Tastatur-Kit im Alice-Stil

Die Hände auf jede Seite einer geteilten Tastatur zu legen, ist ein ergonomischer Zug, und jetzt machen wir es! Um ein außergewöhnliches DIY-Tastatur-Kit zu sein, nimmt Epomaker Alice das "arisu"-Layout an, das sich leicht vom traditionellen Alice-Layout unterscheidet. Es ist auf der Grundlage einer 65% Tastatur geteilt, die aus dem ursprünglichen Alice-Layout entwickelt wurde, um die Nachfrage nach Pfeiltasten und einigen Funktionstasten auf einer Seite zu erfüllen.

Dichtung montieren & Schallabsorption Baumwolle

Dichtungsmontierte Tastaturen sind dafür bekannt, dass sie ein gedämpftes Schreibgefühl vermitteln, da die Platte nicht in direktem Kontakt mit dem Gehäuse steht. Im Vergleich zu anderen Befestigungssystemen kann eine mit Dichtungen montierte Tastatur, insbesondere mit einer PC-Platte, ein rückprallendes Tippgefühl vermitteln, da die Dichtungen den Stoß bei jedem Tastenanschlag abfedern. Was den Klang betrifft, so verwenden wir die schallabsorbierende Baumwolle zwischen der Platte und der Leiterplatte, so dass sich die Tastatur weich anhört und anfühlt

VIA/QMK Programmierbar

Epomaker Alice DIY Kit ist programmierbar durch VIA/QMK. Für Benutzer, die nicht an das Alice-Split-Layout gewöhnt sind, gibt es nichts Bequemeres, als die Tasten von VIA neu zu belegen, ohne die eigene Firmware neu zu flashen. Die Änderungen können auf dem Board gespeichert werden, so dass man sich keine Sorgen machen muss, dass der gespeicherte Speicher beim Abziehen und Wiedereinstecken der Tastatur verloren geht. Durch die Kompatibilität mit QMK bietet die Epomaker Alice ein großes Potenzial an Programmier- und Modifikationsmöglichkeiten, das es zu entdecken gilt.

3-Pin & 5-Pin Hot-Swappable PCB

Bei einer DIY-Tastatur sind die Hot-Swap-Sockel auf der Platine praktisch, um mechanische Schalter nach Belieben auszutauschen, ohne dass Sie Schwierigkeiten beim Löten haben. Da die Tastatur sowohl 3- als auch 5-polig Hot-Swap-fähig ist, können Sie die allgemeinen 3-poligen und 5-poligen Schalter nach Belieben installieren oder austauschen. Das Epomaker Alice DIY-Kit enthält in der Tat eine Vielzahl von Funktionen, die für Gamer und DIY-Enthusiasten interessant sind. Eine Alice-Tastatur selbst zu gestalten, klingt einfach gut!

Sorgfältig abgestimmter Plattenstabilisator

Die Stabilisatoren dieses DIY-Kits wurden sorgfältig abgestimmt, um ein Klappern der großen Tasten wie der Leertaste und der Modifikatoren zu verhindern. Im Vergleich zu den üblichen 2u-Stabilisatoren, die leicht auf dem Markt zu finden sind, bietet das Epomaker Alice DIY-Kit für mechanische Tastaturen ein hochwertiges und stabiles Tipperlebnis und bietet Heimwerkern eine alternative Option, um mehr Spaß beim Wechsel der Stabilisatoren zu haben./p>

Gestapeltes Acrylgehäuse mit erstaunlicher RGB-Hintergrundbeleuchtung

Tastaturen auf Acrylbasis sind cool für Tipper, da sie mit Hintergrundbeleuchtung viel heller sein können. Der Epomaker Alice DIY-Bausatz verwendet ganze Acrylteile, die zu einem kompletten Gehäuse gestapelt werden, und installiert LEDs und RGB-Module auf der Platine. Die Hintergrundbeleuchtung kann nicht nur durch die Buchsen, sondern auch von den Seiten der Tastatur aus leuchten und so auch bei Dunkelheit eine sichtbare Umgebung schaffen..

To be able to customize your key layouts, RGB, macros, and other functions in EPOMAKER Alice you can use the VIA Software with the use of a JSON File.

Download for Windows Download for macOS
Instructions to install on Windows:
  1. Unzip the file to find the .exe and .json files.
  2. Install the .exe file in your computer.
  3. Run the VIA software once installed.
  4. Import the JSON file to be able to edit the EPOMAKER Alice settings inside VIA.
Instructions to install on macOS:
  1. Unzip the file to find the .exe and .json files.
  2. Unpack the .dmg file
  3. Drag the VIA software to your applications folder to install it.
  4. Authorize the VIA software in: System Preferences > Security & Privacy.
  5. Import the JSON file to be able to edit the EPOMAKER Alice settings inside VIA.

Group Buy Timeline

04.Aug.2022
Interest Check of Epomaker Alice DIY Kit
24.Aug.2022
Launch Day for Epomaker Alice Group Buy
29.Aug.2022
Stop Accepting Cancellations
Early Sep.2022
Sorting out Information and Preparing for Production
Sep.07.2022
Campaign Ends
Late Sep.2022
Mass Production Begins
Late Oct.2022
Shipment Starts

*The scheduled timeline might be adjusted depending on the needs. We will collect the feedback and notify the changes (if any) via the Group Buy Updates.

FAQ

About Group Buys

What is a Group Buy?

A Group Buy (or GB) is a term widely used in the keyboard community, which is super similar to crowdfunding. This is a process in which each customer unites together and uses the collective buying power to purchase goods at a reduced price or at all. Note here that products in group buy must reach a certain amount of products sold before manufacturing can start. After the buy hits its minimum order quantity (MOQ), and the GB period ends, production will begin and the shipment follows.

Group Buys from Epomaker.com are non-cancellable and non-refundable after the Groupbuys go live for 5 days. For example, a GB starts on Monday, then after Friday, we can't cancel and refund the order for you. This is because, after 5 days of the start, we usually have started to sort out the order data for mass production. Changes and cancellations will delay the overall process and ruin everyone's experience, which is the last consequence we want to see.

Each Group Buy has a "closed" date. If the group buy doesn't reach the MOQ by the end of the last day, the production will not be made, and you will receive a full refund without questions.

What are the benefits of joining a Group Buy?
  • ✅ You get to purchase and enjoy the product at the earliest.
  • ✅ Affordable prices for high-quality products. The price of a GB product is usually the lowest within at least 6 months.
  • ✅ Extras and gifts. Depending on different GBs, you might get exclusively discounted add-on products, or free gifts by joining a group buy as an early supporter.
  • ✅ Being more than a customer. You might also get to contribute your suggestion and feedback to the final product. Reasonable and realistic suggestions might be accepted and conducted to the final product. To us, there's nothing more valuable than your voice.
  • ✅ Secure, authentic, reliable, and transparent process. I bet you have done your search and noticed that there are some shady vendors who disappear after collecting money from GB supporters, regardless of whether the GB meets the MOQ or not. The first crowdfunding campaign started by Epomaker can be traced to 2020. Since then, we have successfully fulfilled at least 6 campaigns for our supporters. Time has examined us for you as well as training us to become better and better.
So I placed an order, now what?

Well, now we wait. Kindly check the timeline and schedule posted on the specific Group Buy page, and you will know how long the wait could be before production and shipment. Keep an eye on the page update and your inbox, you will get an email including a tracking number when your order is shipped. Follow our socials or join our discords, you can also find notifications and help there

PRODUCT SPECIFICATIONS
Layout
Alice split, 69 Tasten
Hot-Swap
Unterstützt 3/5-polige Schalter
Schalter Typ
Mechanical Cherry MX Style Schalter
Hintergrundbeleuchtung
RGB
Konnektivität
USB-C
Gehäuse Material
Gestapeltes klares Acryli
Software
VIA/QMK Kompatibel
Besondere Taste Größe
  • R-Shift: 1.25u
  • L-Spacebar: 2u
  • R-Spacebar: 2.75u
  • Dimension
    327*170*30mm
    WHAT’S IN THE BOX?
    • Epomaker Alice QMK/VIA Kit (einschließlich PCB, Montageplatte, Stabilisatoren)
    • Typ-C Kabel

    Project Updates

    Update by Epomaker Team - November 08, 2022

    Update #3  Shipment for Epomaker Alice GB Starts!

    Dear Supporters,

    Greetings! 

    The shipment for the Epomaker Alice QMK/VIA DIY Kit has started. We ship the orders according to the sequence of placing orders. Once your order is shipped, you will receive an email including a tracking number for you. All GB orders are expected to be sent this week, except for those with out-of-stock items.

    This is our very first Alice layout keyboard, so we are so grateful that you stay with us for this Groupbuy. Please feel free to leave a comment to share your thoughts in this update, or directly share how you feel about it in our Discord if you have any inquiries. We might release a pre-built version in the future if we receive enough request for that.

    In the end, we hope that you enjoy the Epomaker Alice QMK/VIA DIY kit! 

     

    Cheers, 

    Epomaker Team

    Comments: 0 - Join the conversation
    Update by Epomaker Team - September 24, 2022

    Update #2 New Change to Epomaker Alice!

    Dear Supporters, 

    Greetings!

    There will be two changes on the Epomaker Alice!

    First thing of the first is that the PCB will be installed with south-facing LEDs, as we have received much feedbacks regarding the LEDs orientation. Another change is that underglows will be added to the keyboard, so it will be more shining with the transparent acrylic case.

    Some of you may worry that the original shipping time would be delayed because of the improvement. Please don’t be worried about that. We will still arrange shipment for you at the end of October and will keep you updated.
     
    Thank you so much for your feedback. Our community power always motivates us to make better products. We hope we can grow up together with all of you and become better!

    Stay tuned!

     

    Sincere, 

    Epomaker Team

    Comments: 0 - Join the conversation
    Update by Epomaker Team - September 13, 2022

    Update #1 Thanks for Joining The Groupbuy of Epomaker Alice!

    Dear Supporters, 

    Greetings! We are excited to see that the Epomaker Alice group buy has ended. As scheduled, the mass production will start around this week and the shipping date will be around late October, 2022. We’ll keep everyone updated here. 

    Since the GroupBuy ends, you may have noticed that the price goes back to the retail price. And orders placed after the end of the GB will be processed after we ship out all the GB orders. 

    Feel free to shoot an email to support@epomaker.com whenever you need. We are always happy to help. 

    Stay tuned!

     

    Gratefully, 

    Epomaker Team

    Comments: 0 - Join the conversation

    Customer Reviews

    Based on 9 reviews
    33%
    (3)
    11%
    (1)
    22%
    (2)
    22%
    (2)
    11%
    (1)
    C
    Customer
    G

    F

    s
    shirley lu
    Never received it

    Epomaker put the wrong shipping address for my item, it was “returned to sender”. I haven’t heard back from customer service other than that it’ll be destroyed when they receive the “return”

    Hello,

    Thank you for leaving a review here.

    We are so sorry for the issue you met. It could cause an incomplete address if you didn't include 'Apt.#'. before your house or apartment number. But we are working on to improve this process to avoid the issue you met.

    In the meanwhile, you can also choose to add shipipng fees to upgrade the shipping for your order. The express shipping will greatly avoid such matters. If you agree to upgrade the shipping method, our support will be happy to help you with it.

    Thank you for your understanding.

    Kind regards,
    Epomaker Team

    A
    Andres Hernandez
    Great Keyboard

    It went pretty well in the build even though a little fragile but it was described like it so its pretty ok

    J
    Jennilyn Gabor
    A few squeaky spots...

    This is my first keyboard from epomarker and I absolutely love it along with the Alice Adventure keycaps... however there are two really squeaky spots. When I lean my hands just a little on the bottom left corner of the keyboard, it squeaks. It's like styrofoam. The left Shift and Control keys are extremely squeaky...

    Other than that. I'm pretty happy with the board. It just sucks that I'm not comfortable with opening the keyboard to see if I can fix the squeaky keys.

    Hello,

    Thank you for leaving a review here.

    We are so sorry that you found the keyboard not satisfying at some points. We will share your opinions with the factory to avoid the issue you met.

    If you have met any problems about the keyboard, please feel free to contact us by emailing to support@epomaker.com and attaching your order number. Our support will be happy to help you out.

    If you have other thoughts on the product, feel free to leave a review here.

    Thank you for your understanding.

    Kind regards,
    Epomaker Team

    G
    G.b.
    Really happy with my build

    Compared to the other reviews, I am in love this with keyboard base. It looks stunning, it was easy to put together, the VIA json file worked great (i received mine later than the other reviewers so it was fixed before I tried to use it). I also do not have any sort of squeaking or noise from the keyboard base. I'm really happy with it, it looks stunning and feels great as my daily keyboard.

    FAQ

    Shipping & Handling

    Which countries do you ship to?

    We are generally able to ship to most countries via DHL Express, and many countries via Standard Shipping. You may clarify with our team to see whether Standard Shipping is available to your country.

    Note: For the country of UK, India and Russia, we can only do Standard Shipping. For countries of Africa, Argentina, Hawaii, Kuwait, Mauritius, Montenegro and Sri Lanka, to name a few, we can only do Express Shipping. Click here to read our Shipping Policy.

    How much does shipping cost?

    We have two shipping methods - Standard Shipping and Express Shipping.

    Standard Shipping Is free for most countries/areas.

    Express Shipping via DHL Express is 10-40USD depending on your country. If your order is over 500USD, DHL Express Shipping is free*.

    *The GK96S, SK96S, AK84S and NT68 are exceptions for free shipping.

    Shipping fees exclude import taxes or processing fees that might be applicable for your country. Epomaker is not responsible for any form of such fees.

    How long does it take to receive the order after it is placed?

    For in-stock products, your order will be shipped within 3 working days. Customized items will take a longer time (do check in with our staff for more information). On normal non-sale days, once your parcel is shipped:

    • For Standard Shipping, it takes about 2-3 weeks for items to be delivered after it is shipped. For some countries, it might take up to 2-3 months, depending on your country and its custom procedure. The duration for transit is beyond our control. Epomaker does not arrange refunds for such cases. Please consider an upgrade to DHL Express or keep the waiting time in mind.
    • For Express Shipping, it takes about 3-7 days for items to be delivered after shipping out.

    *Note: Shipping period might be affected due to festive seasons or other unforeseen circumstances.

    Warranty & Returns

    7-Day Return Policy

    On the ground of disliking a product, you may return any non-customized and non-sales product that is sealed, within the 7 days upon receiving it. To be eligible for a return, your item must be unused and in the same condition that you received it. It also must be in the original packaging.

    Customized and sales products, accessories, or spare parts are excluded from the 7-day return policy. The shipping fee, handling fees, or any form of tax caused by return will NOT be refunded. Additionally, a restocking fee (35% of the item’s retail value) will be charged under this circumstance... Click here to read our full return policy.

    1 Year Warranty

    Epomaker offers a 1-year warranty for keyboards and DIY kits, and offers a 6-month warranty for keycap sets and cases (e.g the case-only product sold separately). Batteries will be covered by the 3-month warranty. Accessories such as keycap pullers, switch pullers, free spare keycaps, cables etc., are excluded from the warranty. To claim for a warranty or confirm whether your product is eligible for return/warranty, please kindly contact us via support@epomaker.com.

    The warranty does not extend to any product whose serial number has been defaced or altered, just as the warranty will cease if you make modifications in the software not authorized by Epomaker. Click here to read our full Warranty Policy.

    48 Working Hours response to Support Inqueries.

    For items that are damaged, incorrect, or faulty upon delivery, you must contact support@epomaker.com within 7 days upon delivery. You need to provide any solid proof of the problem you come across. Epomaker will help you identify the problem, and may cover the shipping cost according to the agreed amount. Please kindly note that a shipping fee that is extremely higher than the 15% of product value is non-refundable. The shipping fee won’t be refunded if the product is not with any manufacturer defects.

    Product Questions

    How to choose different switch options?

    To choose the suitable switch, it depends on the scenario you use the keyboard and your preference on the typing experience. Here is our helpful guide for your reference: View our Switch Selection Guide

    Where can I find the manual/software/driver for my item?

    For manuals and software, you may find it in this link: software downloads page

    Are there any keyboard with layouts other than ANSI (US Layout)?

    As the ANSI is one of the most popular layouts around the world, our keyboards are following this trend for now. For other layouts, we will try our best to make them available on our website in the future.

    I want to make myself a DIY keyboard. Where can I find some help?

    You may join our Discord to ask for assistance: Click here to Join

      You have successfully subscribed!
      This email has been registered